Electrode Processing Lines
Critical for preparing electrodes before cell assembly. These systems support both small- and large-scale production.
Mixing Machine
Homogenises active material, binder, and solvent to create a stable slurry for coating.
Mixing Machine Specifications
| Capacity - Chamber | 5 Liter |
|---|---|
| Capacity - Working | 3 Liter |
| Capacity - Up-down | Hydraulic motor driven |
| Vessel - Material | STS304 |
| Vessel - Buffer | Inside #300, Outside #200 |
| Vessel - Nozzle Position | Side, can be specified by customer |
| Vessel - Jacket | Cooling Water, 0.1Mpa |
| Planetary - Impeller | 90° Twist Blade (2ea) |
| Planetary - Motor | 1.5kW × 60Hz × 3Phase |
| Planetary - Revolution | 68rpm (revolution), 180rpm (rotation) |
| Disperser - Impeller | Saw Disc Type |
| Disperser - Motor | 1.5kW × 60Hz × 3Phase |
| Disperser - Rotation | Max. 3,000rpm |
| Control Panel - Operation Type | PLC Control, Touch Screen 8.4" |
| Control Panel - Auto-Set Parameter | rpm, time, temperature, step |
| Control Panel - Manual Display | High speed rpm, Low speed rpm, Timer, Temp, Step |
| Cooling Unit | DAEHO Cooler, M3 |
| Vacuum Pump | KNF, N820.3FT.18 |
| Ultimate Vacuum | 85% |
| Power | AC220 or 380V ±10%, 50/60Hz |
| Dimension & Weight | 700(W) × 1500(D) × 1350(H)mm, Approx. 1Ton |
Coating Machine
Applies the electrode slurry evenly onto metal foil (cathode/anode) with tight thickness control.
Coating Machine Specifications
| Coating Type | Comma Reverse, Slot Die (option) |
|---|---|
| Coating Mode | Continuous & Intermittent |
| Foil Width | Max. 350mm |
| Coating Width | Max. 200mm |
| Un-winding Unit | AC Servo Motor Torque PID Real Time Control Range 15N ~ 100N |
| Re-winding Unit | AC Servo Motor Torque (Tension Detector Applied) PID Real Time Control Range 15N ~ 100N |
| Coating Roller Width | Ø 160mm × 250mm Width |
| Coating Speed | 0.5m ~ 5m/min (Max. 10m/min) |
| Slurry Supply | Manual |
| Dryer Type | Heated Air Convection Dryer (Circulation of Heated Air from upper and Lower Nozzle) |
| Dryer Zone Length | 1.2m × 3Zone = 3.6Meter |
| Power | 380V / 3Phase / 60Hz (Approx. 55kW) |
| Dimension & Weight | Approx. 5800(W) × 1600(D) × 2420(H)mm Approx. 5.5ton |
Roll Press Machine
Compresses the coated foil to increase density and improve adhesion, enhancing energy performance.
Roll Press Machine Specifications
| Foil Width | Max. 350mm |
|---|---|
| Coated Width | Max. 300mm (full coating, pattern coating) |
| Un-winding Unit | 1-Axis Cantilever & Air Expansion |
| Pressing Unit - Gap Control | Screw & Taper Block |
| Pressing Unit - Pressing Type | Heating Roller (Winding type) |
| Pressing Unit - Pressing Mode | Hydraulic Pack System |
| Pressing Unit - Pressing Temp. | Max 150°C (Normal 80°–100°C) |
| Pressing Unit - Machinery Speed | 10m/min (Normal 2–5m/min) |
| Pressing Unit - Heating Source | Electrical Cartridge Heater |
| Re-winding Unit | 1-Axis Cantilever & Air Expansion |
| Power | AC 380V, 3 phase, 60 Hz / 10Kw |
| Dimension & Weight | Approx. 1700(W) × 1600(D) × 1500(H)mm, Approx. 3Ton |
Get in Touch
Contact Us
"*" indicates required fields
Connect
Cell tab specification >
Please fill in your specification below and we will get back to you with a quotation.
"*" indicates required fields