Pouch Cell Assembly Lines
Designed for assembling flexible, high-capacity pouch cells used in EVs, consumer electronics, and energy storage systems.
Punching Machine
Cuts electrodes into the desired shape and size with high accuracy.
Punching Machine Specifications
| Capacity (PPM) | 2 ppm |
|---|---|
| Punching Clearance | < 0.1mm |
| Burr | Below 20μm |
| Mold Q’ty | 1 Set (Anode & Cathode) |
| Loading & Unloading | Manual |
| Punching Quantity | 1ea/Shot |
| Kind of safety device | Area Sensor, Safety Cover, EMS Switch |
| Control | PLC, Button |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 10A [TBD] |
| Dimension & Weight | Approx. 500(W) × 650(L) × 800(H)mm / 70kg |
Stacking Machine
Aligns and stacks cathode, anode, and separator layers into a multi-layered cell structure.
Stacking Machine Specifications
| Capacity (PPM) | 0.5 ppm |
|---|---|
| Electrode Loading | Magazine 100 Sheet |
| Stacking Quantity | User Setting (Touch Panel Setting) |
| Separator Unwinding | Auto (Motor Control) & Tension Control |
| Loading & Unloading | Manual |
| Wrapping | Auto (Touch Count Setting) |
| Separator Cutting | Auto |
| Tapping | Manual |
| Kind of safety device | Area Sensor, Safety Cover, EMS Switch |
| Control | PLC, Touch |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 20A, ELB Type [TBD] |
| Dimension & Weight | Approx. 1400(W) × 1600(L) × 1800(H)mm / 700kg |
Tab Welding Machine
Welds tabs onto electrode stacks with precision to maintain connectivity and safety.
Tab Welding Machine Specifications
| Capacity (PPM) | 2 ppm |
|---|---|
| Power Output | 1000 watts |
| Frequency | 35KHz |
| Load Setting | Manual |
| Effective (Ultrasonic Controlled) | 4Channel Power Output Mode |
| Horn & Anvil | Pre 1 set, Anode 1 set, Cathode 1 set |
| Kind of safety device | Area Sensor, Safety Cover, EMS Switch |
| Control | PLC, Button |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 20A [TBD] |
| Dimension & Weight | Approx. 1000(W) × 580(D) × 800(H)mm / 150kg |
Pouch Forming & Sealing Machine
Shapes the pouch housing and partially seals it to prepare for electrolyte injection.
Pouch Forming Machine Specs
| Capacity (SHEET) | 1 |
|---|---|
| Forming Clearance | < 0.1mm |
| Piercing Hole | Ø4 Hole (4ea) |
| Depth Adjustment | Stopper Bolt & Block Gauge |
| Pouch Loading | Manual |
| Pouch Unloading | Manual |
| Kind of safety device | Area Sensor, Safety Cover, EMS Switch |
| Control | Button |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 10A [TBD] |
| Dimension & Weight | Approx. 600(W) × 750(L) × 800(H)mm / 100kg |
Tab Sealing Machine
Shapes the pouch housing and partially seals it to prepare for electrolyte injection.
Tab Sealing Machine Specifications
| Capacity (SHEET) | 1 |
|---|---|
| Heating Temperature | Max. 220°C |
| Temp Control & Setting | Temp Controller & SSR, PID Control |
| Sealing Pressure Control | Air Regulator & Stopper |
| Sealing Pressure | 40~200Kgf |
| Sealing Bar | NAK 80 |
| Sealing Time | Touch Setting & 0.1sec Control |
| Cell Setting Stage | Pouch pin-hole matching |
| Kind of safety device | Area Sensor, Safety Cover |
| Control | PLC, Touch panel |
| Power | AC 220V, 1Phase, 50/60Hz, 15A [TBD] |
| Dimension & Weight | Approx. 500(W) × 660(L) × 900(H)mm / 50kg |
Side Sealing Machine
Shapes the pouch housing and partially seals it to prepare for electrolyte injection.
Side Sealing Machine Specifications
| Capacity (SHEET) | 1 |
|---|---|
| Heating Temperature | Max. 220°C |
| Temp Control & Setting | Temp Controller & SSR, PID Control |
| Sealing Pressure Control | Air Regulator & Stopper |
| Sealing Pressure | 40~200Kgf |
| Sealing Bar | NAK 80 |
| Sealing Time | Touch Setting & 0.1sec Control |
| Cell Setting Stage | Pouch pin-hole matching |
| Kind of safety device | Area Sensor, Safety Cover |
| Control | PLC, Touch panel |
| Power | AC 220V, 1Phase, 50/60Hz, 15A [TBD] |
| Dimension & Weight | Approx. 500(W) × 660(L) × 900(H)mm / 50kg |
Electrolyte filling Machine
Adds electrolyte under vacuum to ensure uniform distribution across the cell.
Electrolyte Filling Machine Specifications
| Capacity (SHEET) | 1 |
|---|---|
| Dispenser | Hi-Bar Pump |
| Pressure Setting | Temp Controller & SSR, PID Control |
| Sealing Pressure Control | Air Regulator |
| Standby Tank | 10ℓ |
| Weight Check | Lode Cell & Scale |
| Weight Display | Indicator |
| Cell Loading | Manual |
| Cell Unloading | Manual |
| Cell Setting Stage | Lead Tab Jig, Pouch Film Guide |
| Control | PLC, Touch Panel |
| Kind of safety device | Area Sensor, Safety Cover |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 15A |
| Dimension & Weight | Approx. 750(W) × 7300(L) × 900(H)mm / 80kg |
Vacuum Sealing Machine
Final sealing of the pouch under vacuum to eliminate trapped air and prevent moisture ingress.
Vacuum Sealing Machine Specs
| Capacity (SHEET) | 1 |
|---|---|
| Sealing Temperature | Max. 220°C |
| Sealing Bar Material | NAK80 |
| Chamber Up & Down | Air Cylinder |
| Heater | Pin Heater |
| Temp Setting & Control | Temp Controller & SSR, PID Control |
| Sealing Time | Touch Screen Setting |
| Vacuum | 750 mmHg |
| Vacuum Step | 5Step |
| Vacuum Control | Vacuum Sensor & Vacuum Valve |
| Vacuum Pump | Bush RA0025F (Teflon seal kit) |
| Process Setting | Sequence Touch Screen Setting |
| Piercing | Auto Piercing (Degassing) |
| Control | PLC, Touch |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 30A [TBD] |
| Dimension & Weight | Approx. 750(W) × 750(L) × 1300(H)mm / 100kg |
Hot Pressing Machine
Applies heat and pressure to stabilize cell structure and improve electrode contact post-assembly.
Hot Press Machine Specifications
| Capacity (SHEET) | 1 |
|---|---|
| Pressing Force |
Max. 600Kg 0.3Mpa 330Kg, 0.4Mpa 460Kg, 0.5Mpa 550Kg, 0.6Mpa 600Kg |
| Pressing Pressure Setting | Air Regulator |
| Heating Temperature | Max. 150°C |
| Temp Setting & Control | Temp Controller & SSR, PID Control |
| Pressing Time | Touch Setting |
| Press Up & Down | Air Cylinder |
| Cell Loading | Manual |
| Cell Unloading | Manual |
| Control | PLC, Touch Screen |
| Compressed Air | 0.5Mpa (Max. 0.7Mpa) |
| Power | AC 220V, 1Phase, 50/60Hz, 20A [TBD] |
| Dimension & Weight | Approx. 600(W) × 640(L) × 800(H)mm / 80kg |
Get in Touch
Contact Us
"*" indicates required fields
Connect
Cell tab specification >
Please fill in your specification below and we will get back to you with a quotation.
"*" indicates required fields